I learned something new: milk doubles as glue. Use it for jam; use it for beer! It's easy and cheap, and dries nearly clear! (Sorry; after I typed the first sentence I couldn't stop myself.)
A few days ago, a commenter asked about a good method for affixing DIY printed labels to jelly jars. Andy Biggs, mastermind behind the Beer and Jam Labelizers, mentioned he uses milk to glue labels to his bottles of homebrewed beer. What?!? After a bit of internet research, I learned this is a common method in the homebrew beer community. Labels need to stick on securely, but be removed easily so the bottles can be reused.
Must. Test. This.
A preliminary note: don't try this with inkjet-printed labels. The ink will bleed and run if it gets wet. Stick to (har har) laser-printed labels, either color or black and white.
Use whole milk or 2% to wet the back of the label. Then just stick it to clean glass.
(I've read that skim milk doesn't work well, but haven't tried it. It's probably similar to using just water: the label clings while wet but falls off when dry.)
When the milk has dried, the label is stuck on firmly. See? It tears when you try to pull it off. But when you run it under water and get the paper wet, it peels off easily with no residue left behind.
If you need glue that's even stronger, try a recipe using gelatin.
I read about similar concoctions in several online forums, then tested and modified a recipe.
Homemade glue ingredients:
2 tablespoons water
1 packet unflavored gelatin
3 tablespoons milk
Put the water in a small bowl and sprinkle the gelatin over it. Wait about 5 minutes. Then microwave the milk to nearly boiling and add it to the gelatin. Stir until the gelatin is completely dissolved. This recipe yields 1/4 cup of glue.
The glue will look like this. Brush it onto the backs of labels while it's still warm and liquid. When it cools to room temperature, it becomes a solid gel. You can heat it for 15 seconds or so to liquify it again. Or you can eat it if you're hungry.
As you might imagine, the milk will spoil eventually, so the wet glue mixture should only be stored a couple days.
The milk-gelatin glue bonds paper to glass even more strongly than milk alone. It requires longer soaking in water and a little more rubbing to get the label off, but again, it comes off cleanly. No need for solvents to remove any sticky, gummy residue.
These tricks would work well for sticking posters to windows or mirrors, too.
A few days ago, a commenter asked about a good method for affixing DIY printed labels to jelly jars. Andy Biggs, mastermind behind the Beer and Jam Labelizers, mentioned he uses milk to glue labels to his bottles of homebrewed beer. What?!? After a bit of internet research, I learned this is a common method in the homebrew beer community. Labels need to stick on securely, but be removed easily so the bottles can be reused.
Must. Test. This.
A preliminary note: don't try this with inkjet-printed labels. The ink will bleed and run if it gets wet. Stick to (har har) laser-printed labels, either color or black and white.
Use whole milk or 2% to wet the back of the label. Then just stick it to clean glass.
(I've read that skim milk doesn't work well, but haven't tried it. It's probably similar to using just water: the label clings while wet but falls off when dry.)
When the milk has dried, the label is stuck on firmly. See? It tears when you try to pull it off. But when you run it under water and get the paper wet, it peels off easily with no residue left behind.
If you need glue that's even stronger, try a recipe using gelatin.
I read about similar concoctions in several online forums, then tested and modified a recipe.
Homemade glue ingredients:
2 tablespoons water
1 packet unflavored gelatin
3 tablespoons milk
Put the water in a small bowl and sprinkle the gelatin over it. Wait about 5 minutes. Then microwave the milk to nearly boiling and add it to the gelatin. Stir until the gelatin is completely dissolved. This recipe yields 1/4 cup of glue.
The glue will look like this. Brush it onto the backs of labels while it's still warm and liquid. When it cools to room temperature, it becomes a solid gel. You can heat it for 15 seconds or so to liquify it again. Or you can eat it if you're hungry.
As you might imagine, the milk will spoil eventually, so the wet glue mixture should only be stored a couple days.
The milk-gelatin glue bonds paper to glass even more strongly than milk alone. It requires longer soaking in water and a little more rubbing to get the label off, but again, it comes off cleanly. No need for solvents to remove any sticky, gummy residue.
These tricks would work well for sticking posters to windows or mirrors, too.
How amazing and how simple! Must try that.
ReplyDeleteWell, isn't that clever! And so are you in your poetic punnyness. Ha!
ReplyDeleteI wonder who spilled their milk and figured out what a great glue it made! I am envisioning homework stuck to a drinking glass......
Not yours, of course. You and your brother spilled that whole pitcher of milk on the floor, not onto paper. But I prob'ly shouldn't tell on you. Nobody cried over it, but your mum sure got mad! ;)
Mum
Alex dumped his bowl of apple pie and ice cream on the couch last night. I think ice cream might be good glue, too.
ReplyDeleteDefinitely tips to keep in mind! I think you're amazing, making the time to suss all these things out for us and making everything you do as well!
ReplyDeleteI get curious, so I like experiments. :)
ReplyDeleteOh, dear.... You didn't take the time to experiment, though, huh?
ReplyDeleteI did not. :)
ReplyDeleteJudging by the way my shoes stick to the kitchen floor after my kids make a milkplosion, this should really come as no surprise. But it still does. Good to know!
ReplyDeleteThis is so cool!
ReplyDeleteWow! It is really easy. Very clever post. I can make use of this.
ReplyDeleteMy pottery teacher claims that unglazed pottery which would normally be porous can be made non-porous by sealing it with milk. I think she says you just swish some milk around the inside of the pot and then pour it out. I've never quite believed her - but if you can use milk as glue then maybe it works. (My pottery lessons are all in French hence my uncertainty about the actual process).
ReplyDeleteWow! I love finding out things like this. Cheap, easy and natural. My favourite things!
ReplyDeleteWow! I love finding out things like this. Cheap, easy and natural. My favourite things!
ReplyDeleteOMG I've been searching for a natural glue that comes off when needed. And it's been in my fridge all along! Thanks for this post :)
ReplyDeleteIt totally makes sense. Whenever I find the napkin glued to the counter next to my kids' cereal bowl, I will remember that it's not a mess, it's a craft project.
ReplyDeleteThat's right—take a moment to marvel at the miracle that is Milk.
ReplyDeleteIt won't smell when the milk starts to go bad on your label?
ReplyDeleteIt shouldn't get stinky since the milk has dried. Like the dried flakes you find around the plastic cap of a milk jug, or like powdered milk. There's no moisture for bacteria to grow in and spoil the milk.
ReplyDeleteThis is great! I hate gluey labels that don't come off properly and end up in a mushy mess once you've scrubbed them off.
ReplyDeleteI wonder if this allows the paper to be removed in such a way that it's still recyclable even! Great tip - thanks :)
This is very clever! I have so many friends turning 21 soon and this would be a great thing to do by replacing the labels and making it into one personalized for them. It makes a great keepsake present! follow me back at http://dormfordimes.blogspot.com/
ReplyDeleteYou clarify the answer to the question of your commenter in a good way. I appreciate it.
ReplyDeleteI'm going to try this for paper mache. I'd put it in a small crock pot or on a low temp heating element to keep it liquid but I bet it would work...and my hands won't get cold dipping the paper bits.
ReplyDeleteLove this idea!
ReplyDeleteI am going to try this with mini bottles and our printed logo, thank you for the post!
-Lisa,
paintsavvy.blogspot.com
I only have an inkjet computer and print my labels with it. I used milk as a glue this year and the ink did not run at all, even when I completely submerged it. It may depend on what paper and/or type of ink you use.
ReplyDeleteInteresting! My inkjet printing runs when wet, but good to know it might be possible for some!
ReplyDeleteWow this could be really helpful for bottle labels in Seattle, WA I always have the hardest time. Thanks for this.
ReplyDeleteThank you so much for the tip, I was looking for adhesive labels for my jars but could not find anything small and affordable enough. Now I can print my own and stick it on without adhesive chemicals!
ReplyDeleteThank you so much!
I just tried the milk method and it works perfectly! FedEx Office does laser printing and I used a very, very small amount to apply to the back if the paper so it would seep through. Took a few tried to get it right but this is a fantastic and cheap solution for labeling. Thank you!
ReplyDeletei love your sense of humor :) thanks for the helpful tips too ;)
ReplyDeletei am looking for a way to stick rice paper to a bathroom window for privacy- think this would work??
ReplyDeleteif not, other ideas?
(i know i can go buy it, but i already have a ton of rice paper) TIA!
Not sure since I haven't worked with rice paper before. If you have a ton, you could always test a chunk. Otherwise, repositionable/temporary spray adhesive? I bought some at Michael's for a different project.
ReplyDeleteI definitely need to keep this in mind for later. It is such a neat trick to have handy. Thanks for the post!
ReplyDeleteAlena | http://www.nwlabel.com
This is amazing - works perfectly, hello personalized labels on my jam!
ReplyDeleteSuper useful! Do you know if this will work on plastic bottles as well?
ReplyDeleteI tried it on a plastic bucket, and my label popped off after an hour or so. But it binds beautifully to glass. So I'm on the hunt for plastic-friendly alternatives!
DeleteI would guess yes, but haven't tried it.
ReplyDeleteI'm sorry... but you are awesome.
ReplyDeleteWhat a great tip, I was looking for an adhesive that would be easy to wash off of jam jars and this is much easier than I expected. I just mixed up some trim milk powder in a little water and it worked perfectly.
ReplyDelete