Recycled gift bows: yellow pages version

Here's a less pointy variation of the magazine gift bow. I used the yellow pages this time.

Cut 1" wide strips from pages removed from a phone book. Stacking several sheets and slicing them lengthwise with a paper cutter or rotary cutter is quickest. If you are one of the three people who still use the yellow pages, make sure you don't remove any sections you might need someday, like Clowns or Paternity. (Yes, those are real.)

Cut 5 or 6 full-length strips, depending on how full you'd like the bow to be. Cut 4 strips that are 3" shorter. Save one of the leftover short ends to use in the center of the bow.

Form each strip into an "eight" shape, securing the ends in the center with tape. (The photo above shows five shorter loops, but I ended up using only four.) Make a loop with one of the 3" leftover ends.

Arrange the longer pieces evenly to form a circle and staple it in the center. Swinging open the stapler helps position it without squashing the loops.

Repeat with the shorter set of loops. Then layer the smaller piece on top of the larger piece and staple them together in the center. Attach the single loop to the center with a piece of double-stick tape.